Another day of wheel work (and so on).
A customer brought in a wheel for work.
The rim is a Kinlin XR200 in 20H,
the hub is a Novatech 291, and the spokes are CX-RAY, so
it's a front wheel with the same specs as Nomulab Wheel No. 5 with the old Tni Evo hub.
The wheel itself had no issues,
but unfortunately the rim had gotten dented in a buckle.
After inspecting it, the damage was unrepairable, so we decided to replace the rim.
I swapped it with a new XR200 from our shop inventory, so it's still technically a Nomulab Wheel No. 5.
Got it built up.
Reused the spokes, but installed new nipples.
The old rim only had a few hundred km on it,
so it's a shame, but there's no helping it.
At the customer's request, I built it with internal spoke routing (Numspokethrough).
A customer brought in a wheel for work.
The rim is a Kinlin XR200 in 20H,
the hub is a Novatech 291, and the spokes are CX-RAY, so
it's a front wheel with the same specs as Nomulab Wheel No. 5 with the old Tni Evo hub.
The wheel itself had no issues,
but unfortunately the rim had gotten dented in a buckle.
After inspecting it, the damage was unrepairable, so we decided to replace the rim.
I swapped it with a new XR200 from our shop inventory, so it's still technically a Nomulab Wheel No. 5.
Got it built up.
Reused the spokes, but installed new nipples.
The old rim only had a few hundred km on it,
so it's a shame, but there's no helping it.
At the customer's request, I built it with internal spoke routing (Numspokethrough).