Another day, another wheel (and so on).
I built the front wheel for Nomu Lab Wheel #5.
The original wheel was an XR200 rim built by the customer themselves,
next was an XR200 rim that I built after that one broke,
and this time I built another XR200 rim after that one broke too.
This is the customer's third-generation wheel,
and the second-generation Nomu Lab Wheel #5.
Hub is a Novatech 291 hub
(equivalent to Tni Evo hub, or rather the OEM original)
20H with spokes from CN Spoke's aero style with round holes,
slightly thicker than the CX-RAY,
and per the customer's request, I built it as an inpoke radial pattern.
The single red-painted spoke
was positioned at their specification:
"opposite the valve hole, next to the rim seam on the left side."
I built the front wheel for Nomu Lab Wheel #5.
The original wheel was an XR200 rim built by the customer themselves,
next was an XR200 rim that I built after that one broke,
and this time I built another XR200 rim after that one broke too.
This is the customer's third-generation wheel,
and the second-generation Nomu Lab Wheel #5.
Hub is a Novatech 291 hub
(equivalent to Tni Evo hub, or rather the OEM original)
20H with spokes from CN Spoke's aero style with round holes,
slightly thicker than the CX-RAY,
and per the customer's request, I built it as an inpoke radial pattern.
The single red-painted spoke
was positioned at their specification:
"opposite the valve hole, next to the rim seam on the left side."