Another day of wheel building (etc.).
I replaced the front hub on Nomu Lab Wheel No. 1
with a White Industries T11 hub and rebuilt the wheel.
The previous hub was an Evo Lite hub, and since the T11 hub has a slightly larger flange diameter,
I could have reused the spokes by cutting them about 2mm shorter,
but the customer wanted new spokes since they'd been in use for about four years,
so I used brand new spokes.
I used blue aluminum nipples on both sides of the valve hole.
For this job, I built the wheel from a completely disassembled state with rim and hub fully separated,
so it meets the criteria for "another day of wheel building (etc.)" —
and even if it didn't, I'm building another wheel today anyway, so there's no problem.
I replaced the front hub on Nomu Lab Wheel No. 1
with a White Industries T11 hub and rebuilt the wheel.
The previous hub was an Evo Lite hub, and since the T11 hub has a slightly larger flange diameter,
I could have reused the spokes by cutting them about 2mm shorter,
but the customer wanted new spokes since they'd been in use for about four years,
so I used brand new spokes.
I used blue aluminum nipples on both sides of the valve hole.
For this job, I built the wheel from a completely disassembled state with rim and hub fully separated,
so it meets the criteria for "another day of wheel building (etc.)" —
and even if it didn't, I'm building another wheel today anyway, so there's no problem.