Wheels again today (and so on).
I built the rear wheel for Nomu Lab Wheel No. 5.
Evolite hub, 24H, black semi-competition 4-cross spoke pattern
with red aluminum nipples.
I'll do the truing later.
～Bonus～
My personal Nomu Lab Wheel No. 5 rear wheel, which we also use at the shop for derailleur adjustments and such,
With Stans tubeless rim tape and valve,
IRC tubeless tire,
and Stans sealant,
I confirmed that it doesn't lose air to any problematic degree for practical use.
However, since this rim is not tubeless-ready,
I can't rule out the possibility that the tire could instantly separate from the rim if it gets punctured.
It's quite dangerous, so you kids out there please don't try this at home.
I built the rear wheel for Nomu Lab Wheel No. 5.
Evolite hub, 24H, black semi-competition 4-cross spoke pattern
with red aluminum nipples.
I'll do the truing later.
～Bonus～
My personal Nomu Lab Wheel No. 5 rear wheel, which we also use at the shop for derailleur adjustments and such,
With Stans tubeless rim tape and valve,
IRC tubeless tire,
and Stans sealant,
I confirmed that it doesn't lose air to any problematic degree for practical use.
However, since this rim is not tubeless-ready,
I can't rule out the possibility that the tire could instantly separate from the rim if it gets punctured.
It's quite dangerous, so you kids out there please don't try this at home.