Another day building wheels (and so on...).
Built the rear wheel for Nomu Lab Wheel #8.
Duro hub, 28H (actually comes in 28H spec only)
Built with semi-CX sprint spokes, 46-hole JIS lacing
Black aluminum nipples. I'll tension the spokes later.
Since the customer's using this for cyclocross,
I chose a Duro hub that gives 28H on the rear wheel,
but since they're fairly light, I went with semi-CX sprint spokes
instead of semi-comp.
The hub flanges are fairly large diameter and symmetrical left to right.
I went with an offset rim.
The photo above is shot from the freewheel side,
and you can see how the rim holes are offset to one side.
Built the rear wheel for Nomu Lab Wheel #8.
Duro hub, 28H (actually comes in 28H spec only)
Built with semi-CX sprint spokes, 46-hole JIS lacing
Black aluminum nipples. I'll tension the spokes later.
Since the customer's using this for cyclocross,
I chose a Duro hub that gives 28H on the rear wheel,
but since they're fairly light, I went with semi-CX sprint spokes
instead of semi-comp.
The hub flanges are fairly large diameter and symmetrical left to right.
I went with an offset rim.
The photo above is shot from the freewheel side,
and you can see how the rim holes are offset to one side.