Another wheel day (and so on...).
Built the rear wheel with Grota Tack's 30mm high tubular rim.
DT350 hub, 24H, semi-CX sprint (deliberately not semi-comp)
46 JIS lacing.
I'll do the spoke nipple truing later.
Currently it's a 142mm thru-axle
with XDR freebody, but I'll be changing both.
I couldn't get a 24H rear hub immediately in any other spec,
so I had to source this one reluctantly.
I've been centering the wheel in this configuration, but...
I swapped it out for a Shimano 11-speed freebody
and converted to a 135mm quick-release dropout.
The dimensions came out differently than expected.
The rim was shifted toward the freewheel side—meaning I can tension the non-freewheel side more—
but since the freewheel side was already sufficiently tight,
I eased the freewheel side by half
and tightened the non-freewheel side by half
and re-centered the wheel.
Built the rear wheel with Grota Tack's 30mm high tubular rim.
DT350 hub, 24H, semi-CX sprint (deliberately not semi-comp)
46 JIS lacing.
I'll do the spoke nipple truing later.
Currently it's a 142mm thru-axle
with XDR freebody, but I'll be changing both.
I couldn't get a 24H rear hub immediately in any other spec,
so I had to source this one reluctantly.
I've been centering the wheel in this configuration, but...
I swapped it out for a Shimano 11-speed freebody
and converted to a 135mm quick-release dropout.
The dimensions came out differently than expected.
The rim was shifted toward the freewheel side—meaning I can tension the non-freewheel side more—
but since the freewheel side was already sufficiently tight,
I eased the freewheel side by half
and tightened the non-freewheel side by half
and re-centered the wheel.