Another day with wheels (and so on).
I built a rear wheel using a Grota Tack 40mm high tubeless ready rim.
Duro hub 28H semi-comp four-cross JIS lacing.
I'll do the spoke nipples later.
Both the front and rear hubs this time are from a customer.
The Tni Duro hubs for some reason
only come in a front 24H, rear 28H configuration.
↑This is what we call the "660 hub" here at the shop,
the Tni six60 (Six Sixty) hub,
and it gets its name from the fact that
the freebody has six pawls and
the ratchet has 60 teeth.
The 660 hub appears to be made by a different manufacturer
than the Revo disc hub, but
↑the Duro hub
based on the printing format of the splines on the freebody,
you can tell it's from the same manufacturer as the 660 hub.
I built a rear wheel using a Grota Tack 40mm high tubeless ready rim.
Duro hub 28H semi-comp four-cross JIS lacing.
I'll do the spoke nipples later.
Both the front and rear hubs this time are from a customer.
The Tni Duro hubs for some reason
only come in a front 24H, rear 28H configuration.
↑This is what we call the "660 hub" here at the shop,
the Tni six60 (Six Sixty) hub,
and it gets its name from the fact that
the freebody has six pawls and
the ratchet has 60 teeth.
The 660 hub appears to be made by a different manufacturer
than the Revo disc hub, but
↑the Duro hub
based on the printing format of the splines on the freebody,
you can tell it's from the same manufacturer as the 660 hub.