Today's another wheel (and so on).

I feel like I saw this same rim not too long ago (→here),
but I built the rear wheel with an 88mm-high tubular rim.


WH-RS300 hub, 20H
Black Campy/CX Sprint spokes with
gold aluminum nipples.

As for the wheel from the link at the top,
I wrote that I'd tie the spokes later,
but in the end I never did.
The spokes were short enough and on the non-freewheel side too—
just gripping them by hand gave me almost immovable tightness.
This wheel's customer had actually seen the previous wheel in person,
and at that time they said "with this, we don't need spoke ties,"
so for this wheel not only did I skip tying the spokes,
but I didn't even weave the final crossing pattern to begin with.