Wheels again today (and so on).
Built a disc brake front wheel
with a Reynolds Attack rim.
The rim has no brake zone
and is designed for disc brakes.
Novatec D791 hub, 24H
Sapim Aero SB II/III, left-right different diameter, reverse Italian lacing
Rainbow-colored (VAS) nipple pattern.
I'll do the spoke threading later.
I have a customer's Novatec D791 front hub and
D792 rear hub on loan,
but based on my history of wheels I've built in the past,
the D791 had slightly high-low flanges,
and the D792 had quite reverse high-low flanges,
but that was because they were the six-bolt disc rotor mounting version.
This time's D791/D792 hubs have
center-lock mounting, so they have CL at the end of the part number,
with the D791 having equal flanges on both sides,
and the D792 having slightly high-low flanges.
Built a disc brake front wheel
with a Reynolds Attack rim.
The rim has no brake zone
and is designed for disc brakes.
Novatec D791 hub, 24H
Sapim Aero SB II/III, left-right different diameter, reverse Italian lacing
Rainbow-colored (VAS) nipple pattern.
I'll do the spoke threading later.
I have a customer's Novatec D791 front hub and
D792 rear hub on loan,
but based on my history of wheels I've built in the past,
the D791 had slightly high-low flanges,
and the D792 had quite reverse high-low flanges,
but that was because they were the six-bolt disc rotor mounting version.
This time's D791/D792 hubs have
center-lock mounting, so they have CL at the end of the part number,
with the D791 having equal flanges on both sides,
and the D792 having slightly high-low flanges.