Wheels again today (and so on).
Continuing from yesterday.
Built a rear wheel with
a Mavic XC621 rim and
a 135mm quick-release disc hub.
The hub is a DT 350,
quick-release spec with a 6-bolt rotor mount,
from the era when they had reverse high-low flanges.
The sticker on the hub shell has been peeled off,
so in that condition you can't distinguish it
from a 340 hub,
but checking the part number on the original box
confirms it's definitely a 350.
28H Campagnolo/Comp 26 JIS lacing
with no cross pattern.
I checked to be sure,
but it turned out to be a star ratchet design
rather than a three-pawl style.
Continuing from yesterday.
Built a rear wheel with
a Mavic XC621 rim and
a 135mm quick-release disc hub.
The hub is a DT 350,
quick-release spec with a 6-bolt rotor mount,
from the era when they had reverse high-low flanges.
The sticker on the hub shell has been peeled off,
so in that condition you can't distinguish it
from a 340 hub,
but checking the part number on the original box
confirms it's definitely a 350.
28H Campagnolo/Comp 26 JIS lacing
with no cross pattern.
I checked to be sure,
but it turned out to be a star ratchet design
rather than a three-pawl style.