Today it's wheels again (and so on).
A customer brought in the front wheel from a Nomu Lab Wheel No. 4.
They wanted me to swap out the rim for one from a Nomu Lab Wheel No. 2.
If the spokes on the original wheel hadn't been cut with a spoke cutter beforehand,
I can cut them down to the length needed for the Nomu Lab Wheel No. 2 (though the reverse isn't possible).
I was able to build it by reusing the spokes.
It's an Evolite Hub 20HCX-RAY counter-radial spoke pattern.
I reused the hub and spokes, but installed new nipples.
A customer brought in the front wheel from a Nomu Lab Wheel No. 4.
They wanted me to swap out the rim for one from a Nomu Lab Wheel No. 2.
If the spokes on the original wheel hadn't been cut with a spoke cutter beforehand,
I can cut them down to the length needed for the Nomu Lab Wheel No. 2 (though the reverse isn't possible).
I was able to build it by reusing the spokes.
It's an Evolite Hub 20HCX-RAY counter-radial spoke pattern.
I reused the hub and spokes, but installed new nipples.