Another day of wheels (and so on).
Before that—after closing (officially),
a customer came by asking for a full explanation
on press-fit bottom brackets.
↑probably forgotten something
Another day of wheels (and so on).
Unrelated to that,
I was planning to build Nomu Lab Wheel #1,
but I ended up cutting spokes for #5 instead.
Since I didn't want to leave those spokes sitting around,
I decided to build the #5 rear wheel.
I cut black spokes, and since there's an order for
black spokes with red nipples, I'm building that set.
Evolite hub, 24 holes, black semi-comp 4×6 lacing.
I'll do the truing later.
As I mentioned before, the customer wanted red aluminum nipples,
so I'm using those.
Before that—after closing (officially),
a customer came by asking for a full explanation
on press-fit bottom brackets.
↑probably forgotten something
Another day of wheels (and so on).
Unrelated to that,
I was planning to build Nomu Lab Wheel #1,
but I ended up cutting spokes for #5 instead.
Since I didn't want to leave those spokes sitting around,
I decided to build the #5 rear wheel.
I cut black spokes, and since there's an order for
black spokes with red nipples, I'm building that set.
Evolite hub, 24 holes, black semi-comp 4×6 lacing.
I'll do the truing later.
As I mentioned before, the customer wanted red aluminum nipples,
so I'm using those.