Another day working on wheels (and so on).
I built the front wheel for Nomu Lab Wheel #3.
20H black CX-RAY straight radial lacing,
The hub is a Novatech AS61CB
that a customer left with me—
a small/wide flange hub designed for straight spokes.
The CX-RAY straight spokes I used this time were replacement spokes,
270mm long with an extended plain section on the rim end,
no-thread design (spoke cutter required),
and cuttable down to 240mm—
but when I calculated the spoke length, it happened to be just over 240mm,
so I ended up with a perfect spoke protrusion, just like off-the-shelf spokes.
I built the front wheel for Nomu Lab Wheel #3.
20H black CX-RAY straight radial lacing,
The hub is a Novatech AS61CB
that a customer left with me—
a small/wide flange hub designed for straight spokes.
The CX-RAY straight spokes I used this time were replacement spokes,
270mm long with an extended plain section on the rim end,
no-thread design (spoke cutter required),
and cuttable down to 240mm—
but when I calculated the spoke length, it happened to be just over 240mm,
so I ended up with a perfect spoke protrusion, just like off-the-shelf spokes.