Today I was planning to start rebuilding the front and rear wheels that were built with 7700 Dura-Ace hubs and
Open Pro rims,
but given how bad their condition was
and since I wasn't fully prepared on my end either,
I'll do the next wheel first.
It's wheel day again (and so on...).
I built a front wheel with
a Gravel Tack (Japanese high-end rim brand) 50mm high tubeless-ready rim.
The hub is a Mavic MR801,
24-hole, black semi-CX sprint spokes,
laced in reverse Italian (64-cross pattern) with spoke nipples,
black aluminum nipples.
Open Pro rims,
but given how bad their condition was
and since I wasn't fully prepared on my end either,
I'll do the next wheel first.
It's wheel day again (and so on...).
I built a front wheel with
a Gravel Tack (Japanese high-end rim brand) 50mm high tubeless-ready rim.
The hub is a Mavic MR801,
24-hole, black semi-CX sprint spokes,
laced in reverse Italian (64-cross pattern) with spoke nipples,
black aluminum nipples.