Another wheel day (and so on...).
Built Nomulabo Wheel No. 5.
Per the customer's request, 20H front and rear with CX-RAY spokes.
Built with red aluminum nipples as the customer requested.
Front inpoke radial lacing was also requested.
Since it's a symmetric build with the same diameter and spoke count on both sides, I can't relatively increase the spoke tension on the non-drive side.
For that reason, I cross-laced the non-drive side.
This is probably the lightest spec for the Nomulabo Wheel aluminum WO rim model.
（In the case of Tni Evo hubs）
Built Nomulabo Wheel No. 5.
Per the customer's request, 20H front and rear with CX-RAY spokes.
Built with red aluminum nipples as the customer requested.
Front inpoke radial lacing was also requested.
Since it's a symmetric build with the same diameter and spoke count on both sides, I can't relatively increase the spoke tension on the non-drive side.
For that reason, I cross-laced the non-drive side.
This is probably the lightest spec for the Nomulabo Wheel aluminum WO rim model.
（In the case of Tni Evo hubs）