Another wheel day (and so on).
Built a rear wheel with
a Gro-Tack (Japanese rim manufacturer) 30mm high tubeless rim.
Gro-Tack disc hub, 24H
Black semi-competition CX sprint 46 JIS lacing.
I'll do the spoke threading later.
With this hub, when built semi-competition,
there have been cases where
the 4-cross competition lacing on the freewheel side
contacts the rear derailleur.
So I went with CX sprint spokes on the freewheel side.
As a result, even though the rim is an offset rim
（a significant factor in correcting
left-right spoke tension differences）,
I had a lot of difficulty tensioning it to the level
that I normally consider "standard" with semi-competition lacing.
The hub dimensions might be a factor too.
Built a rear wheel with
a Gro-Tack (Japanese rim manufacturer) 30mm high tubeless rim.
Gro-Tack disc hub, 24H
Black semi-competition CX sprint 46 JIS lacing.
I'll do the spoke threading later.
With this hub, when built semi-competition,
there have been cases where
the 4-cross competition lacing on the freewheel side
contacts the rear derailleur.
So I went with CX sprint spokes on the freewheel side.
As a result, even though the rim is an offset rim
（a significant factor in correcting
left-right spoke tension differences）,
I had a lot of difficulty tensioning it to the level
that I normally consider "standard" with semi-competition lacing.
The hub dimensions might be a factor too.