Built a rear wheel with a WH-R9100 rear hub and AL22W rim

Another day of wheel work (you know the drill).

A customer handed me the rear hub from a Shimano Dura-Ace wheel,
a WH-R9100 with 20 holes.
I built a rear wheel with this hub and an AL22W rim.


Built the rear wheel.


Freewheel side: black Campagnolo / non-freewheel side: black CX Sprint
with purple aluminum nipples.
For the final crossing, I laced it the same way as the original wheel—not woven—
so there's no tie-and-solder work needed.