Another wheel build today (and so on...).
I built a rear wheel using an AL22W rim designed for rim brakes.
660 hub, 24H, half-comp four-cross lacing
With tie-and-solder, rainbow-colored (VAS) nipples.
...You might be thinking "Wait, isn't this the same wheel as the last post!"
And you'd have a point
(it's for the same customer though)
Today's 660 hub is an unmarked hub shell type,
whereas the one from the previous post
has a Tni logo embossed into the shell,
so you can tell them apart.
I built a rear wheel using an AL22W rim designed for rim brakes.
660 hub, 24H, half-comp four-cross lacing
With tie-and-solder, rainbow-colored (VAS) nipples.
...You might be thinking "Wait, isn't this the same wheel as the last post!"
And you'd have a point
(it's for the same customer though)
Today's 660 hub is an unmarked hub shell type,
whereas the one from the previous post
has a Tni logo embossed into the shell,
so you can tell them apart.