I built the Nomu Lab Wheel No. 3.
It's a semi-championship lacing pattern with non-drive side bracing wires.
I mounted a Continental Competition 22 from our shop stock,
and it went on straight out of the package.
That's not the case with the 19mm version.
The 22mm is quite a tight fit compared to standard tubulars,
but if the 22mm doesn't slide on smoothly, the 19mm will probably be impossible.
This rim has a deep profile, so the tire gets hidden by the rim to a greater degree.
That makes the apparent tire height look lower, and combined with the high rim height,
it looks even taller than the 80mm specification on paper.
It's a semi-championship lacing pattern with non-drive side bracing wires.
I mounted a Continental Competition 22 from our shop stock,
and it went on straight out of the package.
That's not the case with the 19mm version.
The 22mm is quite a tight fit compared to standard tubulars,
but if the 22mm doesn't slide on smoothly, the 19mm will probably be impossible.
This rim has a deep profile, so the tire gets hidden by the rim to a greater degree.
That makes the apparent tire height look lower, and combined with the high rim height,
it looks even taller than the 80mm specification on paper.