I built the matching rear wheel to go with the front wheel I made the other day.
The rim is a DM18 like the front wheel, and the hub is an SLX disc hub
(though SLX doesn't come in a non-disc version anyway).
The front wheel has 36 holes and the rear has 32 holes because
I built the wheels based on the spoke hole count of the hubs I already had.
FH-M675 32H black all-competition two-cross JIS lacing with blue aluminum nipples.
I'll do the spoke tensioning later.
↑This is just after roughly threading the spokes, but
you can see the rim seam is still open.
↑During preliminary assembly
↑Completed assembly
The rim is a DM18 like the front wheel, and the hub is an SLX disc hub
(though SLX doesn't come in a non-disc version anyway).
The front wheel has 36 holes and the rear has 32 holes because
I built the wheels based on the spoke hole count of the hubs I already had.
FH-M675 32H black all-competition two-cross JIS lacing with blue aluminum nipples.
I'll do the spoke tensioning later.
↑This is just after roughly threading the spokes, but
you can see the rim seam is still open.
↑During preliminary assembly
↑Completed assembly