Another day, another wheel (and so on).
Built a cyclocross rear wheel with a Tni AL31W rim in 135mm quick-release width.
Haven't peeled off the sticker yet—just being lazy, I'll do it later.
I mentioned to the customer that the AL22W rim (the rim on Nomulab Wheel No. 8) would be lighter and therefore better,
but since this is replacing a damaged Fulcrum Racing 5 DB rear wheel,
they wanted the rim that matches the front wheel's depth. The rim has a published weight of 490g,
but the actual measurement came in at 507g.
Evo Disc II hub, 24 spoke, black half-comp 46-spoke JIS lacing.
I'll do the spoke nipple tension balancing later.
Built a cyclocross rear wheel with a Tni AL31W rim in 135mm quick-release width.
Haven't peeled off the sticker yet—just being lazy, I'll do it later.
I mentioned to the customer that the AL22W rim (the rim on Nomulab Wheel No. 8) would be lighter and therefore better,
but since this is replacing a damaged Fulcrum Racing 5 DB rear wheel,
they wanted the rim that matches the front wheel's depth. The rim has a published weight of 490g,
but the actual measurement came in at 507g.
Evo Disc II hub, 24 spoke, black half-comp 46-spoke JIS lacing.
I'll do the spoke nipple tension balancing later.