Today it's wheels again (and so on).
I built the front wheel for Nomu Lab Wheel #1.
It's a Black Hub 20H CX radial laced wheel with reverse spokes.
This Black Hub has flange holes designed as slot holes for flat spokes,
so you can use Sapim CX spokes.
The Black Hub is the same as the later-generation TNI Evo Hub, also known as the Novatech 291 Hub,
from the period when the flange holes had lightening holes on the inside.
The hub ends are black instead of silver,
and the hub shell has no logos or markings—it's an unmarked version.
However, about 2 out of every 100
had a different specification where the relationship between the hub end and hub shaft
wasn't threaded like the standard 291 Hub (TNI Evo Hub)
but was instead a press-fit like the 291SL Hub (TNI Evo Lite Hub).
I'd set those aside, but since other hubs like the 660 didn't have slot holes,
I thought this was a good opportunity to use this one.
I built the front wheel for Nomu Lab Wheel #1.
It's a Black Hub 20H CX radial laced wheel with reverse spokes.
This Black Hub has flange holes designed as slot holes for flat spokes,
so you can use Sapim CX spokes.
The Black Hub is the same as the later-generation TNI Evo Hub, also known as the Novatech 291 Hub,
from the period when the flange holes had lightening holes on the inside.
The hub ends are black instead of silver,
and the hub shell has no logos or markings—it's an unmarked version.
However, about 2 out of every 100
had a different specification where the relationship between the hub end and hub shaft
wasn't threaded like the standard 291 Hub (TNI Evo Hub)
but was instead a press-fit like the 291SL Hub (TNI Evo Lite Hub).
I'd set those aside, but since other hubs like the 660 didn't have slot holes,
I thought this was a good opportunity to use this one.