Another wheel day (and so on).
I built a front wheel with Grototack's 50mm high tubeless rim.
I'm not putting this under the "Nomu Lab Wheel" category,
but formally it counts as "Nomu Lab Wheel No. 8 rimless".
Revo disc hub, 24H, black half CX sprint
Laced in 64-spoke reverse Italian with gold aluminum nipples.
I'll do the spoke tie-wrapping later.
The rim is an offset rim, so not only are the spoke holes offset,
but the apex of the rim shape itself is biased to one side.
When looking from the side where the spoke angle is steeper
（rotor mounting side / left side），
the valve hole looks like this.
Flip it over and it looks like this.
I built a front wheel with Grototack's 50mm high tubeless rim.
I'm not putting this under the "Nomu Lab Wheel" category,
but formally it counts as "Nomu Lab Wheel No. 8 rimless".
Revo disc hub, 24H, black half CX sprint
Laced in 64-spoke reverse Italian with gold aluminum nipples.
I'll do the spoke tie-wrapping later.
The rim is an offset rim, so not only are the spoke holes offset,
but the apex of the rim shape itself is biased to one side.
When looking from the side where the spoke angle is steeper
（rotor mounting side / left side），
the valve hole looks like this.
Flip it over and it looks like this.