Another wheel day (and so on).
A customer left me a ZIPP303 rim rear wheel for service.
Here's that hub again.
The reason for the rebuild isn't because it was loose while riding,
but because they wanted to upgrade to 11-speed.
With this hub and full CX-RAY Zeroni lacing all around,
I'm confident the wheel will definitely be tighter than before the rebuild.
Built.
Evolite hub, 24H, semi-competizione 4-cross lacing with tie-in joints.
By the way, this sticker
dates from 2006-2007 model rims based on the design.
Since the hub and rim specs are 2009 models and later,
it looks like it was applied again afterward.
At the ZIPP factory, they lay the rim flat, apply the sticker, then buff it hard with a roller
so the dimple pattern shows through even over the sticker.
But this one was just carefully applied, so the dimple pattern doesn't show through.
A customer left me a ZIPP303 rim rear wheel for service.
Here's that hub again.
The reason for the rebuild isn't because it was loose while riding,
but because they wanted to upgrade to 11-speed.
With this hub and full CX-RAY Zeroni lacing all around,
I'm confident the wheel will definitely be tighter than before the rebuild.
Built.
Evolite hub, 24H, semi-competizione 4-cross lacing with tie-in joints.
By the way, this sticker
dates from 2006-2007 model rims based on the design.
Since the hub and rim specs are 2009 models and later,
it looks like it was applied again afterward.
At the ZIPP factory, they lay the rim flat, apply the sticker, then buff it hard with a roller
so the dimple pattern shows through even over the sticker.
But this one was just carefully applied, so the dimple pattern doesn't show through.