Wheels again today (and so on).
Built up a Tni 50mm carbon rim with a Woodman carbon hub.
Like I've mentioned before, this hub has pretty wide flanges.
The request was to build it with CX (not CX-RAY) on the stiffer side,
so I'm pushing it as hard as spoke tension allows.
Got it built.
Since the flanges are thick, I avoided inpoke radial lacing.
I think the lateral stiffness is plenty solid even so.
Built up a Tni 50mm carbon rim with a Woodman carbon hub.
Like I've mentioned before, this hub has pretty wide flanges.
The request was to build it with CX (not CX-RAY) on the stiffer side,
so I'm pushing it as hard as spoke tension allows.
Got it built.
Since the flanges are thick, I avoided inpoke radial lacing.
I think the lateral stiffness is plenty solid even so.